#
# @(#)Ricoh	6.11 02/04/11
#
# xmcd CD-ROM vendor configuration file
#
#   xmcd - Motif(tm) CD Audio Player
#
#   Copyright (C) 1993-2002  Ti Kan
#   E-mail: xmcd@amb.org
#
#   This program is free software; you can redistribute it and/or modify
#   it under the terms of the GNU General Public License as published by
#   the Free Software Foundation; either version 2 of the License, or
#   (at your option) any later version.
#
#   This program is distributed in the hope that it will be useful,
#   but WITHOUT ANY WARRANTY; without even the implied warranty of
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#   GNU General Public License for more details.
#
#   You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
#
# Install this file as LIBDIR/config/.tbl/Ricoh
# LIBDIR is the XMcd.libdir resource (or XMCD_LIBDIR env variable).
# Please send corrections/additions to "xmcd@amb.org".
#
# Do not remove the following lines.
# tblver=6
# tblalias=Ricoh
#
# File format (colon separated):
# model:mode:vcode:pmsf:p12:p10:pti:ld:ej:mdbd:m10:vctl:vbase:vtaper:paus:\
# strict:ppp:lk:cp:tur:chg:ndisc:sp:msel:dens:rdcmd:be
#
# where,
#	model	Drive model number (text string)
#	mode	SCSI version (1, 2, or 0 if not SCSI pass-through)
#	vcode	Vendor/Method code number
#		SCSI:     vendor codes are defined in scsipt.h
#		non-SCSI: method codes are defined in libdi.h
#	pmsf	"Play Audio MSF" command support
#	p12	"Play Audio (12)" command support
#	p10	"Play Audio (10)" command support
#	pti	"Play Audio Track Index" command support
#	ld	Disc load via "Start/Stop Unit" command
#	ej	Disc eject via "Start/Stop Unit" command
#	mdbd	DBD bit support in "Mode Sense" commands
#	m10	Use 10-byte version of Mode Sense/Select commands
#	vctl	Software controls support (0-7)
#		0 = none
#		1 = volume control supported
#		2 = balance control supported
#		3 = volume/balance controls supported
#		4 = channel routing control supported
#		5 = volume/channel routing controls supported
#		6 = balance/channel routing controls supported
#		7 = volume/balance/channel routing controls supported
#	vbase	Volume base value (0-255)
#	vtaper	Volume control taper characteristics (0-2)
#		0 = linear taper
#		1 = square taper
#		2 = inverse square taper
#	paus	"Pause/Resume" command support
#	strict	Need strict pause/resume symmetry
#	ppp	Need pause to issue new play command
#	lk	"Prevent/Allow Medium Removal" command support
#	cp	"Read Subchannel" command Data Format 1 support
#	tur	Whether the drive returns failure to the Test Unit Ready
#		command when playing audio.
#	chg	Multi-disc changer method code number
#		0 = not a multi-disc changer
#		1 = SCSI LUN addressing method
#		2 = SCSI medium changer method
#		3 = OS ioctl method
#	ndisc	Number of discs supported by drive
#	sp	Spin-up interval in seconds
#	msel	Whether to send "Mode Select" command to set CDDA mode
#	dens	CDDA mode select density code (common values are 0 or 130)
#	rdcmd	The CDDA SCSI read command to use
#		0 = MMC "Read CD (12)"
#		1 = SCSI "Read (10)"
#		2 = NEC "Read CD-DA (10)"
#		3 = Sony "Read CD-DA (12)"
#	be	Whether the drive returns CDDA data in big-endian format
#
#	Except otherwise noted above, the legal value for all fields
#	is 0 or 1.
#
MP6200A:0:1:1:0:0:1:1:1:0:0:3:0:0:1:0:0:0:0:0:0:1:3:0:0:0:1
MP6200S:2:0:1:1:1:0:1:1:0:0:7:0:0:1:0:0:1:1:0:0:1:3:1:0:1:1
